Date Published: November 19, 2026 | 4 minute read | FAQ Article by Adam Pruden at Redwater Dodge
When the first cold snap of winter arrives across Alberta and Western Canada, one of the most common dashboard warning lights drivers encounter is the Tire Pressure Monitoring System (TPMS) indicator, the yellow horseshoe-shaped icon with an exclamation mark inside. At the start of every winter season, service advisors at dealerships across Canada receive dozens of phone calls from concerned drivers asking what that sudden light on their dash means and whether their vehicle needs immediate shop repairs.
As Adam from Redwater Dodge, explains beside a Jeep Grand Cherokee on our showroom floor, most Chrysler, Dodge, Jeep, and Ram vehicles are equipped with an advanced TPMS system designed specifically to alert you when one or more of your tires drops below its recommended air pressure. In the vast majority of early-winter cases, a glowing TPMS light does not indicate a flat tire or a broken sensor, it simply means cold temperatures have caused the air inside your tires to contract. Best of all, you do not necessarily need to bring your vehicle into the service department to clear the warning; with a few minutes at an air pump and a short drive at 25 kilometres per hour, the system will reset itself automatically.
Understanding why your tire pressure warning light appears every autumn comes down to basic physics. Air is a gas that expands when heated and contracts when cooled. For every 5°C to 6°C drop in outside ambient temperature, the air pressure inside your vehicle's tires decreases by approximately 1 pound per square inch (PSI).
In Alberta, where daytime autumn temperatures of +10°C can plunge overnight to -15°C or -20°C, your tires can easily lose 4 to 6 PSI while parked in your driveway. Because Stellantis TPMS sensors are calibrated to trigger a dashboard alert once a tire falls roughly 20% to 25% below its factory placard specification, that sudden overnight temperature drop pushes your tire pressure right across the warning threshold.
Inflating your tires in freezing winter weather used to mean kneeling beside each wheel in the snow, repeatedly checking a handheld pressure gauge while trying not to over-inflate or under-inflate the tire. To make winter tire maintenance effortless, many modern Stellantis vehicles include an innovative built-in feature called Tire Fill Assist.
As Adam demonstrates using the Jeep Grand Cherokee’s Uconnect infotainment screen, Tire Fill Assist uses your vehicle’s horn to tell you the exact second your tire reaches its factory-recommended pressure:
Open Your Uconnect Settings: With the vehicle parked and the ignition in the RUN position, tap the Settings menu on your vehicle's touchscreen head unit.
Verify Tire Fill Assist Is Activated: Navigate to the Safety & Driving Assistance (or Notifications / Alerts) sub-menu and confirm that Tire Fill Assist is toggled on.
Begin Adding Air to the Low Tire: Attach your air compressor chuck to the valve stem of the low tire and begin inflating.
Listen for the Horn Chirp: Once the tire reaches the exact factory-specified PSI listed on your door jamb, the vehicle will automatically honk the horn to let you know you can stop adding air.
If your TPMS system is functioning normally, clearing the warning light after topping up your air pressure requires zero diagnostic tools and no dealership appointment. Follow these simple steps to reset your system at home:
Check Your Door-Jamb PSI Placard: Open the driver-side door and read the white-and-yellow Tire and Loading Information sticker on the door pillar. Inflate all four tires (and the spare, if monitored) to the exact cold-tire PSI listed on that sticker—never use the maximum pressure stamped on the rubber tire sidewall.
Top Up All Tires to Spec: Use a reliable digital pressure gauge or your vehicle's Tire Fill Assist horn alert to confirm every tire matches the door-jamb specification.
Drive at Least 25 km/h: Once all tires are properly inflated, get behind the wheel and drive your vehicle at a steady speed of at least 25 kilometres per hour for a few minutes. As the wheels rotate, the wheel-mounted TPMS transmitters communicate updated pressure readings to the vehicle’s receiver module, and the dashboard warning light will automatically turn off.
| Dashboard Symptom | Likely Cause | Recommended Action |
| Solid TPMS light turns on after an overnight temperature drop | Normal air contraction from cold weather | Inflate all tires to door-jamb PSI and drive above 25 km/h to auto-reset |
| TPMS light turns on while driving and stays on after filling | Slow puncture (nail/screw) or leaking valve stem core | Inspect tire tread for road debris; book a tire repair at Redwater Dodge |
| TPMS light remains illuminated after driving 10+ minutes above 25 km/h | Potential sensor calibration issue or damaged sensor | Bring your vehicle into Redwater Dodge Service for a diagnostic check |
| TPMS light flashes for 60–90 seconds at startup, then stays solid | TPMS system fault or dead internal sensor battery (typically 7–10 years old) | Schedule a TPMS sensor test and replacement with our certified technicians |
While topping up your air and driving above 25 km/h resolves the overwhelming majority of early-winter TPMS warnings, there are times when professional inspection is necessary.
As Adam advises, if you inflate your tires to the exact factory pressure, drive above 25 kilometres per hour, and the warning light still refuses to clear—or if the same tire repeatedly loses pressure every few days, it is time to bring your vehicle in for service. Our factory-trained technicians at Redwater Dodge will inspect the tire for hidden punctures, check the valve stem seals for cold-weather leaks, and electronically scan each TPMS sensor to verify that the system is not malfunctioning.
Whether you need a quick winter tire pressure check, a seasonal wheel swap, or a complete TPMS diagnostic scan, visit Redwater Dodge in Redwater, Alberta, or call our service and sales team at 780-942-3629 today!
Q1. Where do I find the correct tire pressure (PSI) for my Jeep, Ram, or Dodge?
A1. You can find the exact factory-recommended cold tire pressure on the Tire and Loading Information placard located inside the driver-side door jamb. This label specifies the exact front and rear PSI ratings engineered for your vehicle's weight and suspension. Do not inflate your tires to the maximum pressure printed on the outer tire sidewall.
Q2. Why does my tire pressure light turn off by itself after I drive on the highway for 15 minutes?
A2. As you drive at highway speeds, friction between the tire tread and the pavement generates heat, warming the air inside the tire. Because warm air expands, your tire pressure rises by 2 to 4 PSI, often pushing it just high enough to temporarily turn off the TPMS warning light. However, once the vehicle parks overnight and cools down, the light will return until you add air to the tires.
Q3. What does it mean if my TPMS light flashes when I start my vehicle?
A3. A solid yellow TPMS light indicates low tire air pressure. A TPMS light that flashes for 60 to 90 seconds every time you start the engine before turning solid indicates a system malfunction, most commonly a dead internal battery inside one of the wheel sensors (which typically last 7 to 10 years) or an unprogrammed sensor on a set of winter rims.
Q4. Should I check my tire pressure when the tires are hot or cold?
A4. Always check and inflate your tires when they are "cold", meaning the vehicle has been parked for at least three hours or driven less than 2 kilometres. Checking pressure immediately after highway driving yields an artificially high reading due to heat buildup.